Att DEFINITY 7200 series Manual de usuario Pagina 192

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 348
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 191
9-2 DATA COMMUNICATIONS CONFIGURATIONS
_ ___________________________________________________________________________________________________________________________
_ ___________________________________________________________________________________________________________________________
_ ___________________________________________________________________________________________________________________________
DSC AND PSC CONNECTIONS
The dedicated switched connection (DSC) is a feature that provides a dedicated path using circuit-switched
facilities on the System 85 (R2V4) and Generic 2 communications system; the permanent switched
connection (PSC) offers a similar capability on the System 75 and Generic 1.1 communications systems.
DSC and PSC are implemented through communications system administration. No extra hardware is
required.
DSCs and PSCs provide a clear channel through the communication system to connect two ports when
dialed number signaling is not provided on the incoming port. The channel runs at rates up to 64 kbps. A
variety of ports types may be connected through the dedicated communications-system path. They include:
Analog line and trunk ports
DCP ports (digital-line ports on the System 75 [R1V2 and later] and Generic 1 communications system
and GPP ports on the System 85 [R2V4] and Generic 2 communications system)
EIA ports
Note: For EIA connections on the System 85 (R2V4), the bearer capability must be set to 2 on the trunk
group used for the connection. Set the bearer capability through PROC 103, field 15.
DS0 channels of DS1 ports
Figure 9-1 depicts some typical DSC and PSC configurations. Other configurations are possible.
Note that:
24th-channel signaling and B8ZS line coding are required for certain dedicated (PSC and DSC) data
connections through the communications system.
When a dedicated connection must be implemented between a System 75 or Generic 1 endpoint, and a
System 85 or Generic 2 endpoint, the connection should be implemented as a PSC on the System 75 or
Generic 1 communications system. Because PSCs can be established across communications systems,
no DSC is necessary on the System 85 or Generic 2 communications system when the PSC is defined
on the System 75 or Generic 1.
On the System 75 and Generic 1 communications system, PSCs can be defined at either of two
administration screens: the Permanent Switched Connection screen or the Interface Link screen. PSCs
established through the Interface Link screen are more properly called software connections, rather than
PSCs.
Vista de pagina 191
1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 347 348

Comentarios a estos manuales

Sin comentarios